What’s that sound?

Share

A brief guide to diagnosing of drivetrain noise. Words by Iain Treloar and illustrations by Karl Hilzinger

Skipping

Cable tension of rear derailleur

rear-derailleur-barrel-adjuShift to smallest cog at rear (closest to frame), then shift up one gear. If it doesn’t shift, turn the barrel adjuster anti-clockwise until the shift happens fluently.

Derailleur hanger bent

Derailleur-hanger-bentIf the jockey wheels in the derailleur are not exactly in line with each other or the derailleur is visibly angled towards the wheel, the derailleur hanger will need straightening or replacement.

Stiff link in the chain

lubricate-stiff-linkWork your way along the chain, checking that all the links are pivoting smoothly on their pins. If this is not the case, loosen up stiff links with degreaser and then lubricant, pivoting the affecting link back and forth from the pin with your hands.

Slipping

Chain stretch or cog tooth wear

Measure-chain-wearUse a chain-checker to determine whether the chain has stretched. If it has, or if the teeth on the cassette or chainrings are sharply pointed, replace both chain and cassette (they wear together) and perhaps the chainrings (consult a bike mechanic).

Cassette body or freewheel body is shot

Freewheel-or-freehub-wearIf there is sudden loss of resistance when pedalling forwards, remove the cassette to see whether the cassette body may be badly worn,  or if it’s an older style cluster or freewheel (with bearings integrated into cog assembly) the freewheel body could be cactus.

Grinding

If in lower gear at back, check B-tension screw to ensure there’s ample space to clear the derailleur jockey wheels

B-tension-adjusterThe B-tension screw is located at the top of the rear derailleur and determines how far the derailleur sits off the jockey wheels. Winding this in onto the derailleur hanger will push the derailleur down and away from the jockey wheels and stop them rubbing on one another.

If the grinding seems like a vibration felt travelling through the pedals, it may be the bottom bracket.

bottom-bracket-wearCheck for side-to-side play in the bottom bracket by wiggling the cranks with your hand. Also check that the pedals are firmly secured. If in doubt, talk to a mechanic.

Squeaking

If your drivetrain emits high-pitched squeaks as you pedal, add some chain lube.

Ride On content is editorially independent, but is supported financially by members of Bicycle Network. If you enjoy our articles and want to support the future publication of high-quality content, please consider helping out by becoming a member.

 

One thought on “8”

    1. Try taking the saddle off and putting a little lube on the rails.
      If that doesn’t work, take the seat post out, clean it and re-grease it.

      I had an annoying squeaking type noise. Turns out it was muck getting down into the seat post. After cleaning and re-greasing, I added some tape around the entrance to the seat post – no more squeaking!

    1. I totally hear you on the cleats issue. I use an SPD shoe pedal combo and i have had to cut away some of the bottom of my shoes to reduce the friction squeaks… Annoying… 🙂

  1. Another sound problem took some diagnosis.
    I had a clicking sound that came and went around the bottom bracket. I had that repaired but the sound came back.
    Turns out it was the bearings in the peddle. My mechanic said it ws more common than we realized. I had those replaced and now all good……
    So check you peddles.

  2. I am getting an irritating clicking sound correlated with pedal turns, and which sounds like it comes from the frame, but I cannot isolate it. If the chain is slightly stretched, can the chain links click on the front spocket ?

    1. Unfortunately, could be any number of things.

      As Chris Welsh (above) mentioned, it could be the pedals; try putting a different set of pedals on and see if the sound still occurs. I think this is a likely culprit.

      Other suspects could be the chain contacting the front derailleur, an out of alignment chainring, a loose chainring bolt, the bottom bracket, the seat, or even the headset – to name just a few.

      Make changes one at a time to isolate a problem (time consuming and potentially frustrating!), or take the bike to a well-regarded mechanic to sort it out. Good luck!

      Ride On

    2. I had that problem. Turns out the allen nut that held one of the crank arms to the BB axel was loose. Simply tightened it with an allen key and click went away.

      These nuts are facing outwards at the central end of the crank arms.

Leave a Reply to Chris from Lindfield Cancel reply

Your email address will not be published. Required fields are marked *